Flash Official Samsung Galaxy S7 Edge SM-G935F Firmware with ODIN Tool
Official Samsung Galaxy S7 EDGE SM-G935F Stock Rom: Everything You Need to Know
If you own a Samsung Galaxy S7 Edge SM-G935F, you might want to update your device with the official stock firmware. The official stock firmware is the software that comes pre-installed on your phone when you buy it from Samsung or a carrier. It contains the latest security patches, bug fixes, and performance improvements for your device.
Official Samsung Galaxy S7 EDGE SM-G935F Stock Rom
But why would you need to flash the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F? There are several reasons why you might want to do this:
You want to unroot your device and restore it to its original state.
You want to fix a software issue that is causing your device to malfunction or bootloop.
You want to upgrade or downgrade your device to a different Android version.
You want to remove bloatware or unwanted apps from your device.
You want to customize your device with a different CSC (Country Specific Code) or region.
Whatever your reason is, flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F is not a difficult task. You just need to follow some simple steps and use a tool called ODIN. ODIN is a Windows-based program that allows you to flash firmware files on Samsung devices. You can download ODIN from here.
How to Flash Official Samsung Galaxy S7 Edge SM-G935F Stock Rom with ODIN
Before you start flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F, you need to prepare some things:
A Windows PC and a USB cable.
A backup of your data, as flashing will erase everything on your device.
A charged battery, at least 50%.
The official stock firmware file for your device model and region. You can download it from SamMobile or Stock Firmware.
The Samsung USB drivers for your device. You can download them from here.
The ODIN tool. You can download it from here.
Once you have everything ready, you can follow these steps to flash the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F:
Extract the firmware file and the ODIN tool on your PC.
Run the ODIN tool as administrator.
Turn off your device and boot it into Download Mode by pressing and holding Volume Down + Home + Power buttons together for a few seconds. Release the buttons when you see a warning screen and press Volume Up to confirm.
Connect your device to your PC using the USB cable. The ODIN tool should recognize your device and show a blue or green box in the ID:COM section.
Click on the AP button in the ODIN tool and select the firmware file that you extracted earlier. It should have a .tar.md5 extension.
Make sure that only Auto Reboot and F. Reset Time options are checked in the ODIN tool. Do not check any other option or change any other setting.
Click on the Start button in the ODIN tool and wait for the flashing process to complete. It might take several minutes, so be patient and do not disconnect your device.
When the flashing is done, you will see a PASS message in the ODIN tool and your device will reboot automatically.
Disconnect your device from your PC and wait for it to boot up normally. You have successfully flashed the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F.
Conclusion
Flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F is a simple and safe way to update, restore, or customize your device. You just need to follow some simple steps and use a tool called ODIN. However, you should always backup your data before flashing, as it will erase everything on your device. You should also download the correct firmware file for your device model and region, as flashing an incompatible file might brick your device.
We hope this article has helped you learn how to flash the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F. If you have any questions or comments, feel free to leave them below.
Benefits of Flashing Official Samsung Galaxy S7 Edge SM-G935F Stock Rom
Flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F has many benefits. Here are some of them:
You can enjoy the latest features and improvements that Samsung has to offer for your device.
You can fix any software issue that is causing your device to lag, freeze, crash, or drain battery faster.
You can remove any unwanted apps or bloatware that are taking up space and resources on your device.
You can restore your device to its factory settings and wipe out any personal data or malware that might be compromising your privacy or security.
You can change the CSC or region of your device and access different features or services that are available in other countries.
Flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F is a safe and easy way to update, restore, or customize your device. You just need to follow the steps in this article and use the ODIN tool.
Precautions Before Flashing Official Samsung Galaxy S7 Edge SM-G935F Stock Rom
Although flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F is a simple and safe process, there are some precautions that you should take before doing it:
Make sure you download the correct firmware file for your device model and region. Flashing an incompatible file might brick your device or cause other problems.
Make sure you backup your data before flashing, as it will erase everything on your device. You can use Samsung Smart Switch or other backup apps to backup your data.
Make sure you have a charged battery, at least 50%, before flashing. Flashing with a low battery might interrupt the process and damage your device.
Make sure you use a reliable USB cable and PC to flash. A faulty cable or PC might cause errors or disconnections during the flashing process.
Make sure you do not disconnect your device or turn off your PC during the flashing process. This might cause your device to bootloop or brick.
If you follow these precautions, you can flash the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F without any issues. However, if you encounter any problem during or after flashing, you can visit XDA Forums or Get Droid Tips for help and support.
How to Check the Firmware Version of Your Samsung Galaxy S7 Edge SM-G935F
If you want to know what firmware version is currently installed on your Samsung Galaxy S7 Edge SM-G935F, you can check it easily by following these steps:
Go to Settings on your device and tap on About phone.
Tap on Software information and look for the Baseband version.
The Baseband version will show you the firmware version of your device. It will have a format like G935FXXU8ETI2, where G935F is the model code, XXU is the CSC code, 8 is the Android version, E is the year, T is the month, I is the revision number, and 2 is the security patch level.
You can compare your firmware version with the latest one available for your device model and region on SamMobile or Stock Firmware. If you see a newer firmware version, you can download it and flash it on your device using the ODIN tool.
How to Backup Your Data Before Flashing Official Samsung Galaxy S7 Edge SM-G935F Stock Rom
Flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F will erase everything on your device, including your personal data, apps, settings, and media files. Therefore, it is very important to backup your data before flashing. You can use different methods to backup your data, such as:
Samsung Smart Switch: This is an official app from Samsung that allows you to backup and restore your data using a PC or a cloud service. You can download Samsung Smart Switch from here.
Google Backup: This is a built-in feature on Android devices that allows you to backup and restore your data using your Google account. You can enable Google Backup by going to Settings > Accounts and backup > Backup and restore > Google account.
Third-party apps: There are many third-party apps that can help you backup and restore your data, such as Titanium Backup, Helium, Super Backup, etc. You can find them on the Google Play Store or other sources.
Whichever method you choose, make sure you backup your data before flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F. This way, you can avoid losing any important data or files.
How to Root Your Samsung Galaxy S7 Edge SM-G935F After Flashing Official Stock Rom
If you want to root your Samsung Galaxy S7 Edge SM-G935F after flashing the official stock firmware, you need to follow these steps:
Download the latest version of Magisk Manager from here and install it on your device.
Download the latest version of Magisk zip file from here and copy it to your device's internal storage.
Turn off your device and boot it into Recovery Mode by pressing and holding Volume Up + Home + Power buttons together for a few seconds. Release the buttons when you see the Samsung logo.
Select Install from the recovery menu and browse to the Magisk zip file that you copied earlier. Swipe to confirm the installation.
Once the installation is done, reboot your device.
Open Magisk Manager on your device and check if it shows Magisk installed and your device rooted.
Congratulations! You have successfully rooted your Samsung Galaxy S7 Edge SM-G935F after flashing the official stock firmware. You can now enjoy the benefits of root access, such as installing custom mods, removing bloatware, tweaking system settings, etc.
How to Unroot Your Samsung Galaxy S7 Edge SM-G935F After Flashing Official Stock Rom
If you want to unroot your Samsung Galaxy S7 Edge SM-G935F after flashing the official stock firmware, you need to follow these steps:
Open Magisk Manager on your device and tap on the Uninstall button.
Select Restore Images from the options and confirm the uninstallation.
Once the uninstallation is done, reboot your device.
Check if your device is unrooted by using a root checker app or by opening Magisk Manager and seeing if it shows Magisk not installed and your device not rooted.
You have successfully unrooted your Samsung Galaxy S7 Edge SM-G935F after flashing the official stock firmware. You can now enjoy the official features and updates from Samsung without any issues.
Conclusion
In this article, we have learned how to flash the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F using the ODIN tool. We have also learned how to download the firmware file, how to check the firmware version, how to backup your data, how to root and unroot your device, and what are the benefits and precautions of flashing the official stock firmware.
Flashing the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F is a simple and safe way to update, restore, or customize your device. You just need to follow some simple steps and use a tool called ODIN. However, you should always backup your data before flashing, as it will erase everything on your device. You should also download the correct firmware file for your device model and region, as flashing an incompatible file might brick your device.
We hope this article has helped you learn how to flash the official stock firmware on your Samsung Galaxy S7 Edge SM-G935F. If you have any questions or comments, feel free to leave them below. 4e3182286b