How to Customize Pioneer DDJ-T1 Enhanced Controller Mapper v1.2 for Your Needs and Preferences with Traktor Pro 2
Pioneer DDJ-T1 Enhanced Controller Mapper v1.2: A Guide for DJs
If you are a DJ who owns a Pioneer DDJ-T1 controller and uses Traktor Pro 2 software, you might be interested in this article. Here, I will show you how to install and use the latest version of the Enhanced Controller Mapper v1.2, which is a custom mapping that allows you to control the Traktor Pro 2 sample decks with your DDJ-T1. This mapping also adds some extra features and functions that will enhance your DJ performance and creativity.
Pioneer DDJ-T1 Enhanced Controller Mapper v1.2
Introduction
What is the Pioneer DDJ-T1?
The Pioneer DDJ-T1 is a DJ controller that was designed specifically for Traktor Pro 2 software. It has a four-channel mixer, two jog wheels, eight cue points, four hot cues, two FX units, and a needle search function. The DDJ-T1 is plug-and-play compatible with Traktor Pro 2, meaning that you don't need to install any drivers or mapping files to use it. However, if you want to access some advanced features and functions, such as controlling the sample decks, you will need to install a custom mapping file.
What is the Enhanced Controller Mapper v1.2?
The Enhanced Controller Mapper v1.2 is a custom mapping file that was created by zacek100, a user of VirtualDJ.com. This mapping file enables you to control the Traktor Pro 2 sample decks with your DDJ-T1, as well as adding some extra features and functions that are not available in the default mapping. Some of these features and functions are:
Using the shift button to access secondary functions
Using the jog wheels to scratch and nudge the samples
Using the needle search function to jump to different parts of the samples
Using the FX units to apply effects and filters to the samples
Using the hot cues and cue points to trigger and loop the samples
Using the sync button to sync the samples with the master deck
Using the load buttons to load and unload samples
Using the volume faders and crossfader to mix the samples
Using the EQ knobs and gain knob to adjust the sound of the samples
Using the custom button to toggle between sample deck mode and track deck mode
Why should you use it?
If you are a DJ who likes to use samples in your mixes, you will find this mapping very useful and convenient. You will be able to control up to four sample decks with your DDJ-T1, without having to use your mouse or keyboard. You will also be able to apply effects and filters, scratch and nudge, loop and trigger, sync and mix your samples with ease and precision. You will be able to unleash your creativity and add some spice and variety to your DJ sets.
How to install the Enhanced Controller Mapper v1.2
Download the driver and the setting file
The first step is to download the driver and the setting file for your DDJ-T1 from Pioneer DJ's website . The driver will allow you to connect your DDJ-T1 to your computer, while the setting file will import the custom mapping into Traktor Pro 2.
To download them, go to Pioneer DJ's website and select your operating system (Windows or Mac OS). Then, click on "Drivers" and download the latest version of "DDJ-T1 driver for Windows" or "DDJ-T1 driver for Mac OS". Next, click on "MIDI Mapping files" and download "DDJ-T1 setting file for Traktor Pro". Save these files on your computer.
Connect your DDJ-T1 to your computer
The next step is to connect your DDJ-T1 to your computer using a USB cable. Make sure that both devices are turned on and that Traktor Pro 2 is not running.
If you are using Windows, unzip the downloaded file "PioneerDDJ****exe.zip" and double-click on "PioneerDDJ****.exe" to install the driver. Follow the instructions on screen until the installation is complete.
If you are using Mac OS, you don't have to install any driver software. Mac OS standard audio driver will be automatically installed when your DDJ-T1 is connected to your Mac with a USB cable.
Import the setting file to Traktor Pro 2
The next step is to import the setting file into Traktor Pro 2. This will load the custom mapping into the software.
To do this, launch Traktor Pro 2 and go to Preferences > Controller Manager > Device Setup > Add > Import TSI > Pioneer > Pioneer_DDJ_T12.tsi . Click on "Open" and then on "OK". The setting file will be imported and assigned to your DDJ-T1.
Configure the audio settings and preferences
The final step is to configure the audio settings and preferences according to your needs.
To do this, go to Preferences > Audio Setup > Audio Device > Pioneer DDJ ASIO (for Windows) or Pioneer DDJ (for Mac OS). Then, adjust the latency, the sample rate, the output routing, and other options as desired.
You can also customize the layout, the display, the mixer, the transport, the effects, and other aspects of Traktor Pro 2 according to your preferences.
How to use the Enhanced Controller Mapper v1.2
Overview of the main features and functions
Now that you have installed and configured the Enhanced Controller Mapper v1.2, you are ready to use it with your DDJ-T1. Here is an overview of the main features and functions that this mapping offers:
Button/Knob/Fader/Slider/Jog Wheel
Function (Normal Mode)
Function (Shift Mode)
CUSTOM
Toggles between sample deck mode (LED on) and track deck mode (LED off)
N/A
BROWSE
Browses through tracks/samples in browser list/tree
N/A
PUSH BROWSE
Selects tracks/samples in browser list/tree or expands/collapses folders/playlists/groups
N/A
LOAD A/B/C/D
Loads selected track/sample into corresponding deck (A/B/C/D)
Ejects track/sample from corresponding deck (A/B/C/D)
VOLUME A/B/C/D
Adjusts volume level of corresponding deck (A/B/C/D)
N/A
CROSSFADER A/B/C/D ASSIGNMENT SWITCHES
How to control the sample decks with your DDJ-T1
Once you have imported the setting file and switched to sample deck mode, you can start controlling the sample decks with your DDJ-T1. Here is how:
To load a sample into a slot, browse through the samples in the browser list/tree and press the load button (A/B/C/D) that corresponds to the slot you want to load the sample into. To unload a sample from a slot, press the shift button and the load button (A/B/C/D) that corresponds to the slot you want to unload the sample from.
To play a sample, press the play button (A/B/C/D) that corresponds to the slot you want to play the sample from. To stop a sample, press the play button (A/B/C/D) again. To pause a sample, press the cue button (A/B/C/D) that corresponds to the slot you want to pause the sample from.
To sync a sample with the master deck, press the sync button (A/B/C/D) that corresponds to the slot you want to sync the sample from. To unsync a sample, press the sync button (A/B/C/D) again.
To adjust the volume level of a sample, use the volume fader (A/B/C/D) that corresponds to the slot you want to adjust the volume level of. To adjust the volume level of all samples in a deck, use the master volume knob.
To adjust the sound of a sample, use the EQ knobs (low/mid/high) and gain knob that correspond to the slot you want to adjust the sound of.
To apply effects and filters to a sample, use the FX units (1/2) and FX knobs (1/2/3/4) that correspond to the slot you want to apply effects and filters to. You can also use the filter knob to apply a high-pass or low-pass filter to the sample.
To scratch and nudge a sample, use the jog wheel that corresponds to the slot you want to scratch and nudge the sample from. You can also use the needle search function to jump to different parts of the sample.
To trigger and loop a sample, use the hot cues (1/2/3/4) and cue points (1/2/3/4/5/6/7/8) that correspond to the slot you want to trigger and loop the sample from. You can also use the loop in/out buttons to set a custom loop length for the sample.
To toggle between one-shot mode and loop mode for a sample, press the shift button and the play button (A/B/C/D) that corresponds to the slot you want to toggle between one-shot mode and loop mode for.
To toggle between sample deck mode and track deck mode for a deck, press the custom button. The LED will indicate which mode is active.
How to customize the mapping according to your needs
If you want to customize the mapping according to your needs, you can do so by editing the setting file in Traktor Pro 2's controller manager. Here is how:
Go to Preferences > Controller Manager > Device Setup > Pioneer_DDJ_T12.tsi .
Select the mapping assignment that you want to edit from the Assignment Table.
Change the parameters of the mapping assignment according to your preferences. You can change things like MIDI message type, MIDI channel, MIDI note/control number, controller range, interaction mode, assignment type, etc.
Save your changes by clicking on "OK".
You can also export your customized setting file by clicking on "Export" and save it on your computer for future use.
Conclusion
Summary of the main points
In this article, I have shown you how to install and use the Enhanced Controller Mapper v1.2 for your Pioneer DDJ-T1 controller and Traktor Pro 2 software. This mapping allows you to control up to four sample decks with your DDJ-T1, as well as adding some extra features and functions that are not available in the default mapping. You can also customize this mapping according to your needs by editing it in Traktor Pro 2's controller manager.
Benefits of using the Enhanced Controller Mapper v1.2
By using this mapping, you will be able to:
Control up to four sample decks with your DDJ-T1 without having to use your mouse or keyboard.
Apply effects and filters, scratch and nudge, loop and trigger, sync and mix your samples with ease and precision.
Unleash your creativity and add some spice and variety to your DJ sets.
Customize this mapping according to your needs by editing it in Traktor Pro 2's controller manager.
Call to action and resources
If you are interested in using this mapping for your DDJ-T1 and Traktor Pro 2, you can download it from VirtualDJ.com. You can also watch some video tutorials on how to use it on YouTube . If you have any questions or feedback about this mapping, you can contact zacek100 on VirtualDJ.com or leave a comment below.
I hope you enjoyed this article and found it useful. If you did, please share it with your friends and fellow DJs who might benefit from it. Also, don't forget to subscribe to my newsletter for more high-class content writing tips and tricks. Thank you for reading!
Frequently Asked Questions
What is a sample deck?
A sample deck is a feature of Traktor Pro 2 that allows you to load and play short audio clips called samples. Samples can be loops or one-shots of drums, vocals, instruments, effects, etc. You can use samples to add some extra elements or layers to your DJ mixes.
What is a custom mapping?
A custom mapping is a file that defines how a DJ controller interacts with DJ software. It assigns different functions and parameters of the software to different buttons, knobs, faders, sliders, and jog wheels of the controller. A custom mapping can enhance or modify the default mapping that comes with the controller or software.
What is Traktor Pro 2?
Traktor Pro 2 is a professional DJ software developed by Native Instruments. It allows you to mix up to four decks of audio tracks or samples using various features and functions such as effects, filters, sync, loop, cue, hot cue, needle search, etc. It also supports various DJ controllers, audio interfaces, and MIDI devices.
What is Pioneer DDJ-T1?
Pioneer DDJ-T1 is a DJ controller that was designed specifically for Traktor Pro 2 software. It has a four-channel mixer, two jog wheels, eight cue points, four hot cues, two FX units, and a needle search function. It is plug-and-play compatible with Traktor Pro 2, meaning that you don't need to install any drivers or mapping files to use it.
What is Enhanced Controller Mapper v1.2?
Enhanced Controller Mapper v1.2 is a custom mapping file that was created by zacek100, a user of VirtualDJ.com. This mapping file enables you to control up to four sample decks with your DDJ-T1, as well as adding some extra features and functions that are not available in the default mapping.